The shared free lift is within the field of 50". Standard has limited free lift about 4'-6" and is traditionally used for lower lift heights.ĭuplex can be used when the free lift is demanded but lift elevation is a minimal demand. Used for low lift peaks, utilized primarily in Self-propelled, walk-behind gear. The height of the load will vary on the mast stage the forklift is equipped with. The hydraulic pistons are attached to the 2 main vertical structures called the "masts." However, the actual forks that take the load are attached to the primary body of this forklift through a pair of roller coaster series pulleys whose support a gear near at the very top of the mast. This feature allows movement of these forks put loads and to precisely pick into pallets. Still, another feature that's a choice but is currently considered necessary to the majority of users will be the side shift. This feature is for double stacking pallets in a trailer or even staging product in a warehouse. From a simple lifting to station commuting, every mast type has features that expand the application selection of the lift truck or enhance performance further than one another.įree lift is to extend a load over a load for double stacking which the carriage will rise before the inner channel starts stretching. It increases the loading by actuating which piston raising the forks along with your load by controlling the lever in the cab. ![]() ![]() There's a pully at the center of this mast that actuates the carriage. Attached to the carriage would be the forks. The stations are similar in appearance.Ĭonnected to the mast is your carriage. Additionally known as an 'upright', the mast will be the assembly in the front the part that does the job for lifting, lowering, and tilting the load to a safe position.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |